Sitedeki Yeriniz : Ana Sayfa » ÜRÜNLER » CNC KENET

Chrome (Stainless Steel) Dry Milling Drum

Chrome (Stainless Steel) Dry Milling Drum Product Name   :   Chrome (Stainless Steel) Dry Milling Drum

Short Description  :  FOR HEATING, ACCUMULATION OF DUST AND HUMIDIFYING OPERATIONS.


Chrome (Stainless Steel) Dry Milling Drum 

 

SPECIFICATIONS

 

DESCRIPTION

     
     

DRY MILLING DRUM

: DRY MILLING DRUM IS USED IN LAST STAGE OF LEATHER TANNING OPERATION. BASICLY;
    HEATING, ACCUMULATION OF DUST AND HUMIDIFYING OPERATIONS CAN BE DONE.
     

LOADING CAPACITY

: DRY MILLING DRUM´S WORKING CAPACITY IS HALF CAPACITY. PRODUCT QUANTITY AND 
    CHEMICAL CONCENTRATION RATIO CHANGES BY OPERATORS.
     

ROTATION

: MAIN BODY ROTATION SPEED CAN BE ADJUSTED TO PRE-SET VALUES WITH FREQUENCY
    CONTROL UNIT.
     

MAIN BODY MATERIAL

: INSIDE BODY IS COMPLETELY MADE FROM STAINLESS STEEL MATERIAL WITH PERFECT
    SMOOTHNESS SURFACE. HEAT INSULATION GENERATED WITH INTERNAL INSULATION WITH
    GLASS WOOL.
    DRY MILLING DRUM IS MOUNTED ON A ROBUST, PAINTED STEEL FRAME HAVING ALSO
    SAFETY BAR. 
    INSIDE SURFACE AND OUTSIDE COVER ARE COMPLETELY MADE FROM AISI-316L QUALITY
    STAINLESS STEEL MATERIAL.
     

HEATING APPLIANCES

: HEAT TREATMENT OİL, WHICH IS LOCATED INSIDE AIR HEATING TANK, IS HEATED WITH
    RESISTANCE. AIR CIRCULATED WITH FAN MOTOR. WHILE CIRCULATED AIR IS PASSING 
    THROUGH INSIDE OF HEATING TANK, IT BECOMES WARM AND CONTINUES CIRCULATION.
    EQUIPMENTS;
    1) HEATING TANK
    2) RESISTANCE (STAINLESS STEEL)
    3) MANUAL TEMPERATURE ADJUSTMENT SWITCH
    4) AIR BLEEDING PIPE
     

ACCUMULATION OF DUST APPLIANCES

: THERE IS A PARTICULATE TRAP INSIDE DUST COLLECTION TANK. PARTICLES, WHICH ARE  
    INSIDE CICULATED AIR WITH FAN MOTOR, ARE CATCHED BY PARTICULATE TRAP. AND
    CONTINUATION OF THE CIRCULATION, CLEAN AIR JOINS INTO SYSTEM.
    EQUIPMENTS;
    1) AIR CIRCULATION FAN MOTOR
    2) FAN BEAM
    3) ACCUMULATION CYCLONE
     

HUMIDIFYING APPLIANCES

: WATER, INSIDE WATER TANK, IS SPOUTED INSIDE OF DRUM IN PLANNING GAPS, WITH
    BURNER NOZZLE.
    EQUIPMENTS;
    1) HUMIDITY ENTRY FITTING
    2) SELENOID VALVE
    3) WATER TANK
    4) WATER RANGE PIPE
    5) WATER ENTRY VALVE
     

LOADING - UNLOADING DOOR

: LOADING - UNLOADING DOOR IS MADE FROM AISI-316L QUALITY STAINLESS STEEL MATERIAL.
    DOOR OPENS MANUALLY WITH TURNING ECCENTRIC ARMS TO DOWN AND UP SIDES,
    SLIDING DOOR TO RIGHT AND LEFT SIDES. 
    UPPER SIDE OF DOOR MAKES PRESS TO DOOR FRAME AFTER SQUEEZING TO ECCENTRIC
    ARMS. AS THE RESULT OF PRESS LEAKAGE IS PROVIDED WITH SPECIAL PRODUCTION 
    RUBBER, WHICH IS LOCATED ON UPPER SIDE OF DOOR.
     

BEARING TYPE

: HEAVY DUTY TYPE SPERICHAL BEARING IS USED.
     

PULLEY AND BELT

: PULLEY IS OCCURED 6 PIECES ALUMINIUM MATERIAL. THERE ARE 3 BELT CANAL ON PULLEY.
     

SHELVES AND PEGS

: SHELVES AND PEGS ARE MOUNTED INSIDE OF DRUM AND USED FOR MAKING MECHANICAL EFFECT
    TO PRODUCTS.
    SHELVES ARE MADE FROM CONVOLUTED STAINLESS STEEL PLATE AND LOCATED INSIDE OF DRUM
    THOROUGHLY. THERE ARE 4 PIECES SHELVES USED FOR ONE DRUM.
    PEGS ARE MADE FROM STAINLESS STEEL MATERIAL WITH SUITABLE CONVOLUTATION OPERATION 
    IN OUR FACTORY. PEGS ARE MOUNTED BETWEEN THE SHELVES.
     

REDUCER

: COMPLETELY HISAR PRODUCTION AND OPEN TYPE REDUCER IS USED. REDUCER MAKES 
    TRANSMISION TO MAIN BODY BY THE HELP OF PULLEY AND BELT.
     

SOFT START EQUIPMENTS

: FOR SOFT STARTING OF DRUM, FREQUENCY CONTROL UNIT IS USED. SOFT STARTING AVOIDS
    PERCUSSIVE WORKING AND OVERLOAD OF ELECTRICAL MOTOR. ALSO MAKES ELECTRICITY 
    SAVING.
     

PNOMATIC BRAKE

: SPECIAL PRODUCTION PNOMATIC BRAKE IS USED. ALLOWS TO STOP DRUM IN DESIRED POSITION.
     

CONTROL PANEL

: CONTROL PANEL IS PRODUCED ACCORDING TO IP65 PROTECTION CLASSIFICATION AND 
    SAFETY STANDARDS.
    IT CAN BE SET TIME, HEAT AND PERIOD ON CONTROL PANEL AND MAKES TIME SAVING.

CLICK FOR CHROME DRY MILLING DRUM PICTURES